Morgan Adjustable Recoil Pads

The Morgan Adjustable Recoil Pad is a good way of modifying an airgun (or any firearm) for drop or rise of the butt, and also adding length of pull. The recoil pad also allows some adjustment in pitch by squeezing the recoil reducing foam at top or bottom. Morgan Adjustable Recoil Pads are made in the U.S.A. If you have any questions please email me

Morgan Pads adjust rise (5/8 inch) and drop (3/4 inch) and the amount of recoil absorption. Morgan Pads do not rotate or adjust side to side. All Morgan Pads include a Butt Plate that has to be trimmed to fit by the installer. The Butt Plate has two predrilled mounting holes spaced 3.18 inches apart. The mounted pad will add about 1.25 inches to the length of the stock.
They are available in a "Premium Version" with machined aluminum plates, or a "New Version" with black ABS plastic plates. The original die-cast aluminum plates are out of production due to the failure of Morgan's die-casting mold. Each Recoil Pad is packaged with instructions on mounting and adjusting the pad and screws.
Morgan Adjustable Recoil Pad features and details. Morgan Adjustable Recoil Pad typical installation

#4 Curved Recoil Pad

New Version Curved Adjustable Recoil Pad with black ABS plastic plates.

The Butt Plate is 1.85" x 5.25".

$32.00
plus $7.00 S&H for up to two recoil pads anywhere in the USA. 

#14 Premium Curved Recoil Pad

Adjustable Recoil Pad with Curved Shoulder Pad and machined aluminum plates.

The Butt Plate is 1.9" x 5.1".

$51.00
plus $7.00 S&H for up to two recoil pads anywhere in the USA. 

Ordering Information:
Send check or MO to:
Nicholas Carter
25360 Oak Lane
Philomath, Oregon
97370

Email me if you want to pay via Paypal.
Another Airgun Blog My Main Site, Cartertools.com Chapman Screwdriver Kits